Search This Blog

Friday, August 16, 2019

DIY RF ALARM SYSTEM FOR YOUR HOUSE!!!

If you are an EHS person (Electromagnetic Hypersensitive person) you probably experienced before what if feels like when you open the door of your house and a person with a smartphone or other RF emitting device, come in to your house. At first you might not notice it, but after a while you will start feeling the pain.
In order to reduce the chance of that happening we need a RF ALARM SYSTEM that will go off when it will detect an RF signal.

It is possible to do it using the ENV RD10 that can beep when the RF levels are higher than 0.5mW/m2, or with the CORNET ED88TPLUS that sound the alarm when RF levels are higher than 0.18mW/m2. In the case of the CORNET ED88TPLUS  you can also add an external speakers that will make the alarm sound very loud.
Both the ENV RD10 and the CORNET ED88TPLUS can be used with an external power supply.
These of you that turn off the electric power, buth meters (and speakers) can be used with an external  power bank.

I would like to thank Shanny Druker for presenting the need for such a system.

Video  - DIY HOME USE RF ALARM SYSTEM - FULL
https://youtu.be/COe8Ps27dC4



Video - Basic RF ALARM SYSTEM RD10

RF ALARM SYSTEM ED88TPLUS



Parts needed for the ENV RD10 ALARM Setup
1. EMF RD10 EMF meter - http://www.4ehsbyehs.com/emr-meters/env-rd-10
2. USB 2 miniUSB cable - comes with the ENV RD10 meter, can be squired at -  https://amzn.to/31NV71v
3. USB Power supplier - https://amzn.to/31GDq3J

Parts needed for the CORNET ED88TPLUS ALARM setup
1. CORNET ED88TPLUS EMF meter - http://www.4ehsbyehs.com/emr-meters/cornet-ed88Tplus
2. USB 2 MicroUSB cable - https://amzn.to/2KVFGNY
3. USB Power supplier - https://amzn.to/31GDq3J
4. Optional - External USB powered speaker - https://amzn.to/31M7drB
5. Optional - Power bank - https://amzn.to/2yYXbr1

No comments:

Post a Comment